In areas where reflection shooting is difficult, it is often necessary to attenuate the energy in a broad continuous band of disturbing wavelengths to less than a few hundredths of what would be recorded if all units were bunched together. The wavelength band of the attenuated energy should be adjacent to the band of reflection wavelengths received. Attenuation of the undesired energy is best accomplished with multiple detectors or charges. In many areas the pattern should attenuate energy horizontally propagated in all directions, not just in the direction of the detector line. Neither a finite number of uniformly effective, uniformly spaced units in line nor a uniformly effective sheet of finite length will accomplish this result. A system for gradation of the effectiveness of units described in this paper does produce this result (not only for in‐line disturbances but also for disturbances coming in from the side of the line). The attenuation band can be made broad with good attenuation or narrower with still better attenuation, as desired. The variation of effectiveness can be applied to detectors or charges arranged in a horizontal line, over a horizontal area, in a vertical line, or over a vertical area. The principle of varying effectiveness can also be applied to reversed‐polarity detectors in order to accentuate certain apparent wavelengths.
Improvement in imaging in confocal fluorescent microscopes using multiple detectors